How To Put Handles On Kitchen Cabinets

How To Put Handles On Kitchen Cabinets

Putting handles on your kitchen cabinets can refresh the look of your kitchen, making It feel more modern And stylish. If you’re not familiar with how to put handles on kitchen cabinets The task can seem daunting. Fortunately, It’s A relatively simple process That doesn’t require any special tools or expertise.

Measure the distance between The holes of your cabinet handle Before purchasing new ones. This will ensure that the new handles fit perfectly where you want them to be placed. Then, mark where you want each handle to go with a pencil or masking tape. Next, use a drill bit that is slightly smaller than the screw size to make pilot holes for each handle’s screws.

Why Put Handles On Kitchen Cabinets?

Kitchen cabinets Are An essential component of any kitchen. They provide functional And aesthetic value to the room, allowing you to store your utensils, crockery, And appliances in An organized manner. While there Are many ways to enhance the appearance of your kitchen cabinetry, putting handles on them Is one of the simplest yet most effective methods.

Cut Your Handles To Size

Putting handles on kitchen cabinets Is A great way to add functionality And style to your kitchen. If you Are not careful with the size of your cabinet handles, They can stick out too far And become a nuisance. This Is where cutting your handles to size comes in.

When choosing the size of your cabinet handles, It’s important to consider the size of your cabinets themselves. Large handles may look overwhelming on smaller cabinets while small handles may get lost on larger ones. Take note of the dimensions of your cabinets before shopping for handles.

Once you have chosen the right handle size, It’s time to cut them down to fit perfectly. Measure the distance between the screw holes on each cabinet door And mark this distance onto each handle. Use A saw or pair of wire cutters to carefully cut off Any excess material beyond these marks.

Place The Handles On The Doors

Putting handles on kitchen cabinets Is one of the easiest And most effective ways to upgrade your kitchen’s look. It’s also A practical solution that will make It easier for you to open And close your cabinets, especially If they’re new or have been recently refaced. Here Are some simple steps That you can follow to put handles on your kitchen cabinets.

Determine where you want to place The handles. Measure the distance between the screw holes And mark them on your cabinet with A pencil. Make sure the marks Are levelled, So that all of your handles will be at the same height. Once you’ve marked where you want to place each handle, drill pilot holes into each mark using An electric drill.

Attach the screws through the back of each hole from inside of the cabinet and thread them through until they protrude slightly through to outside of the cabinet door.

Preparing The Cabinets

Preparing the cabinets Is An essential step when It comes to renovating your kitchen. One of The vital aspects of cabinet preparation Is putting handles on kitchen cabinets. Handles Are functional as well As decorative, And they give your cabinets A complete look.

To put handles on kitchen cabinets, you need to measure The distance between two holes that Are used for attaching each handle. Once you have marked The position where you want to place The handle, drill holes In the marked Areas using A drilling machine. Make sure that you use appropriate screws while fixing handles onto your cabinet doors.

Before fixing handles onto your kitchen cabinets, make sure that all surfaces of your cabinet doors Are thoroughly cleaned And dried off for better adhesion. You can use rubbing alcohol or Any other cleaning solution recommended by manufacturers to clean And dry off cabinet surfaces.

Measuring For Placement

Putting handles on kitchen cabinets Is A crucial aspect of designing A functional and beautiful kitchen. The placement of The handles, however, Is equally important as It can affect both The aesthetic And usability of your cabinets. Measuring for handle placement ensures that you achieve A consistent look throughout your cabinetry while optimizing their functionality.

To begin, consider the size And shape of your cabinet doors. Tall or slim doors may require handles placed closer to the edge for ease of use, whereas wider doors may benefit from handles positioned in the center to evenly distribute weight when opening. Additionally, take into account Any existing holes or hardware That could influence handle placement.

Another factor to consider when measuring for handle placement Is ergonomics. Handles should be placed at A height that Is comfortable for users to reach without straining their arms or back.

Marking Where To Drill

Putting handles on kitchen cabinets Is A great way to give your kitchen An updated look without having to replace the entire cabinet. However, before you start drilling holes for your new handles, it’s essential to mark where they need to go. Without proper markings, you could end up with unevenly spaced or crooked handles that will detract from the overall look of your cabinets.

To begin marking where to drill, you’ll first need to measure And determine the placement of your new handles. Use A measuring tape And pencil to mark where each handle will go on both sides of the cabinet doors. Make sure that each handle Is at the same height And distance from the edge of the door for consistency.

After you’ve marked all of your spots, use A level tool to ensure that each line where you’ll be drilling is perfectly horizontal or vertical.

Preparing The Surface

Preparing the surface Is A crucial step in putting handles on kitchen cabinets. It ensures that The handles Are securely attached And won’t come loose over time. Before installing the handles, you will want to make sure That the surface of your cabinets Is clean And free of any debris or dirt. This will ensure that the handles adhere properly and stay in place for years to come.

First, remove all hardware from your cabinet doors And drawers. Use a cleaner specifically designed for kitchen surfaces to wipe down each door And drawer front, making sure to remove any grease or grime that may have accumulated over time. Next, use A fine-grit sandpaper to lightly sand each surface where you plan on installing your new handles. This will create A rough surface That will allow the adhesive backing of your handles to grip tightly.

Regular Cleaning Of Handles

Regular cleaning Of handles Is essential for maintaining The hygiene And longevity of your kitchen cabinets. Handles on kitchen cabinets Are used frequently, which leads to the accumulation of dirt, grease, And bacteria over time. This Can lead to unpleasant smells And even health hazards If not properly taken care of. Therefore, It is important to put handles on kitchen cabinets And clean them regularly.

To clean your cabinet handles effectively, you should start by removing Any visible dirt or debris using A soft cloth or sponge with warm soapy water. Next, use A disinfectant spray or wipe to kill any lingering bacteria that may be present on the surface of the handle. It’s also recommended to dry off the handle after cleaning it thoroughly to avoid rusting or corrosion.

Repairing Loose Handles

Loose handles On kitchen cabinets Are A common nuisance that can Be easily fixed with some basic tools And A little bit of patience. When you notice that your cabinet handles Are loose. It’s important to act fast and tighten them up before they become completely detached. In this article, we will show you how to put handles on kitchen cabinets So that they remain secure for years to come.

The first step in repairing loose handles Is to identify the source of the problem. More often than not, loose handles Are caused by screws That have become stripped or worn over time. Once you have identified the cause of the problem, carefully remove The handle from the cabinet using a screwdriver or power drill. With your handle removed, inspect both The screw holes in your cabinet door or drawer And the screws themselves for any damage or wear And tear.

Updating Handles And Knobs

Updating handles And knobs Is A simple yet effective way to give your kitchen cabinets A facelift. New handles And knobs can transform the look of your cabinets from outdated to modern, or from basic to stylish. The best part about this DIY project Is that It’s easy enough for anyone To do.

To start updating your kitchen cabinets, the first step Is choosing new handles And knobs that match your personal style And the overall aesthetic of your space. With so many options available, you’re sure To find something that suits your taste, whether you’re into sleek And modern or traditional and ornate. Once you’ve picked out the perfect hardware, It’s time To get started On installation.

Position Your Handles

If you’re renovating your kitchen, one important detail you can’t ignore Is the placement of handles on your cabinets. Handles Are more than just design elements; They serve A practical purpose in making It easy to open And close your cabinets. So how do you position your handles correctly?

First, consider the size And shape of your cabinet doors. If you have large, heavy doors, you’ll need to place handles At the center or lower end of each door for stability. Smaller doors can benefit from handles placed closer to the top.

Secondly, think about how often you use each cabinet. Frequently used cabinets should have their handles positioned in A way that makes them comfortable to reach And pull open. You don’t want to be straining or reaching awkwardly every time you need something from these cabinets.

Base Cabinets

Base cabinets Are An essential part of Any kitchen design. They provide ample storage space for all your cookware, utensils, And pantry items. However, if you want to make the most out of your base cabinets, you need to ensure that they Are functional And visually appealing. One way to achieve this Is by putting handles on kitchen cabinets.

Handles Are not only practical but also add A touch of style to your kitchen decor. They come In different shapes, sizes, colors, And materials such As metal, wood or plastic. You can choose from A vast array of options that complement your cabinet’s color scheme And overall design aesthetic.

Installing handles on base cabinets is relatively easy And requires minimal effort. All you need is a measuring tape, drill machine with the right bit size for your handle screws And some patience.


As we come to the conclusion of our article, we would like to focus on one particular aspect of kitchen cabinetry that can make A huge difference in both functionality And aesthetics – adding handles. While it may seem like A small detail, handles can completely transform the look And feel of your kitchen cabinets. Not only do they provide An easy grip for opening doors And drawers, But they also add A touch of personality or elegance to the room.

About The Author

Scroll to Top